6,500W Gasoline Generator
Visit www.princessauto.com for more information
13
8254146
V 3.04
ENGINE OIL CHANGE
Drain the oil while the engine is warm to ensure rapid and complete draining.
1. Remove the drain plug and sealing washer, remove the oil filler
cap, and drain the oil.
2. Reinstall the drain plug and sealing washer. Tighten the
plug securely.
3. Refill with the recommended oil and check the oil level.
NOTE:
Wash your hands with soap and water after handling used oil.
AIR CLEANER SERVICE
A dirty air cleaner will restrict airflow to the carburetor. To prevent
carburetor malfunction, regularly service the air cleaner. Service more
frequently when operating the generator in extremely dusty areas.
WARNING! Never run the generator without the air filter. Rapid engine
wear will result.
1. Unsnap the air cleaner cover clips, remove the air cleaner cover,
and remove the element.
2. Wash the air cleaner element in a solution of household detergent
and warm water, then rinse thoroughly, or wash in nonflammable
or high flashpoint solvent. Allow the air cleaner element to
dry thoroughly.
3. Soak the air cleaner element in clean engine oil and squeeze
out the excess oil. The engine will smoke during initial startup
if too much oil is left in the air cleaner element.
4. Reinstall the air cleaner element and the cover.
