2 in. LED Vacuum/Boost Gauge
8238438
V 2.1
2
For technical questions call: 1-800-665-8685
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association
(CSA) or American National Standards Institute (ANSI) when using the tool.
1. Head Protection
a. Always wear impact safety goggles that provide front and side protection for the
eyes.
b. Wear earplugs if the work environment is noisy.
2. Foot Protection
a. Non-skid footwear is recommended to maintain footing and balance.
3. Maintain tool control.
a. Do not operate any machine/tool when tired or under the influence of drugs,
alcohol or medications.
b. Do not overreach when operating a tool. Proper footing and balance enables
better control of a tool in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
1. Ensure the ignition is off and the engine is cool before installing gauge.
2. Disconnect negative (-) battery cable before installing gauges.
NOTE: You may have to reprogram your radio, clock, etc. after reconnecting the battery
cable.
3. Do not alter any parts of the gauge. If the gauge is not functioning properly, contact
Princess Auto for a solution.
UNPACKING
1. Carefully remove the parts and accessories from the box. Retain packaging material
until you have carefully inspected and satisfactorily installed or operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tools and accessories were not damaged
while shipping.
WARNING! Do not install the gauge if any part is missing. Replace the missing part before
operating. Failure to do so could result in a malfunction.
