This water pump is ideal for agricultural, industrial, construction, fisher and garden use. Please read the operation
manual before use to ensure the proper handling and operation. Follow the instructions carefully to keep your
machine in the best running condition, which will prolong its life span.
Specifications
Construction
Water pump consists of gasoline engine and pump kit. The pump is fixed on a frame with a roll bar design.
The self-priming pump consists of a pump body, cover, flow guidance, impeller and seals. Shaft sealing is a
machinery type seal and the pump inlet is higher than the impeller inlet allowing it to self prime with only water
filling the body of the pump. The pump inlet is fixed with a one-way valve to prevent liquid from siphoning back
into the water from the pump body after stopping. It stores enough liquid in the pump body for the next start.
The self-priming pump's flow guidance and impeller are cast iron.
Operation
1. The coupling of suction pipe to the pump must be tight, reliable and without any leaks.
2. Install a filter screen on the suction pipe inlet to protect impurities from being sucked into the pump and
sticking or damaging the impeller.
3. Prime the pump until water overflows.
4. Do not run pump at high speed until after priming.
5. Drain the pump for storage
Model:
8100248
8100255
Suction port diam.:
2"
3"
Max displacement:
9,510 GPH
13,208 GPH
Rated displacement:
5,812 GPH
9,510 GPH
Max head:
85.3 ft
82 ft
Rated head
49.2 ft
42.7 ft
Self-priming time (13 ft)
70 secs
120 secs
Max suction head
26.2 ft
26.2 ft
Rated power:
3.2 kw/3,600 RPM
3.2 kw/3,600 RPM
Displacement:
0.043 gal.
0.043 gal.
Fuel tank
0.95 gal
0.95 gal
Weight
53.4 lbs
58 lbs
Outside dimensions
17.5" x 14.8" x 15"
510" x 375" x 443"
