Specifications
• 18 V DC motor
• 7,000 OPM (orbits per minute)
• 3-1/2" x 3-1/2" x 3-1/2" sanding pads
Sander operation
• Attention: Ensure the switch is off and the battery disconnected before making any adjustments or
repairs, or storing the sander.
• Do not store in locations where the temperature may reach or exceed 50°C.
• The triangular base of the detail sander is coated with hooks, the sanding pads are coated on the non-
abrasive side with loops. This makes it quick and easy to replace sanding pads. The sanding pad must
align perfectly onto the sanding plate.
• When the pad is in position, the sander is ready to operate by pressing the on/off trigger.
Flashlight Operation
• Insert battery into flashlight slot and secure.
• Slide the switch on the handle to 1 of the 2 brightness positions.
• Slide the switch to the off position to turn off.
for any technical questions, please call 1-800-665-8685
4
