8951907
7-1/2 HP 212cc OHV Gas Engine
V 4.0
12
For technical questions call 1-800-665-8685
3. Let engine cool at least 2 minutes before removing the fuel cap.
4. Clean the fuel cap (M) area of dirt and debris. Do not allow dirt or water to
enter the fuel tank.
5. Remove the fuel cap slowly to allow the pressure to equalize.
6. Check the fuel level.
7. Add fuel until it reaches the bottom of the metal collar supporting the fuel
strainer in the fuel tank (Fig. 2-1). Take care to not overfill the tank. It may
be necessary to lower the fuel level depending on operating conditions.
8. Reinsert the fuel tank cap and tighten.
9. Wipe up any spilled fuel before starting the engine or allow to evaporate.
Spilled fuel is both a fire hazard and an environmental hazard. Dispose of
the fuel soaked rags in a proper hazardous waste container.
ENGINE OIL
NOTICE! Engine oil is a major factor affecting engine performance and
service life. Non-detergent and 2-stroke engine oils will damage a 4-stroke
engine and are not recommended.
High-quality detergent engine oils are acceptable if the (API) performance rating
is SF, SG, SH, SJ or higher. Always check the API service label on the oil
container for the performance rating.
1. Check the oil level before each use with a cool engine that is level.
2-1
Fig. 2
