5. Attach the Head Assembly
•
Carefully put the head
assembly over column and
slide it onto column into
position. Align head frame
with table and base.
•
Fix set screws in right side
of head to lock head into
position then tighten with
allen wrench.
6. Install Feeding Handles
• Screw knob on each feed
handle, install them into
hub of pinion shaft.
7. Attach the Arbor and Chuck
• Insert arbor into spindle
first. Pull feed handle
down to press arbor into
place.
•
Open chuck jaws complete-
ly by turning attached
chuck key counter-clock-
wise to the end.
•
Put a piece of scrap wood
on the table to protect
chuck nose.
•
Install chuck to the arbor
tightly.
8. Install knob and screw of
upper pulley cover.
–3–
