3
For technical questions call: 1-800-665-8685
V 2.0
2990245
Double Flaring
Tool Kit
SPECIFICATIONS
Mini Tube Cutter 1/8 to 5/8 in. (3 to 16 mm) diameter tubing
Flaring Press
45° Cone Head
Cone Head swivels
Tubing Vise
Holds 7 different diameters of tubing
Flaring Dies
7 Dies ranging from 3/16 to 5/8 in. (5 to 16 mm) diameter,
in increments of 1/16 in. (1.58 mm)
INTRODUCTION
The double flaring tool kit is a comprehensive kit suitable for cutting and flaring copper, brass and thin walled
aluminum tubing. The tools can cut a tube from 1/8 to 5/8 in. (3 to 16 mm) in diameter. The flaring tool can also
produce high quality 45° single or double flares, either male or female, on tubing from 3/16 to 5/8 in. (5 to 16 mm)
in diameter.
NOTE:
The flaring tools in this kit are not suitable for steel tubing.
SAFETY
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator must follow basic
precautions to reduce the risk of personal injury and/or damage to the equipment. Before allowing someone
else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. Common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
NOTE:
Keep this manual for safety warnings, precautions, operating, inspection and maintenance instructions.
