compounds in the tool's O-rings and other rubber parts.
IMPORTANT!
If a filter/regulator/lubricator is not installed on the air system,
air operated tools should be lubricated at least once a day or after
2 hours work with 2 to 6 drops of oil, depending on the work environment,
directly through the male fitting in the tool housing.
CONNECTING AND OPERATION
WARNING: Ensure you read, understand and apply safety
instructions before use.
1. Only use sockets which are specifically designed for use with a
ratchet wrench.
2. Connect the tool to the air hose.
3. Place the socket over the subject nut and depress the trigger to
operate the tool.
4. To change direction push the button at the top of the handle.
Direction of: "R" for reverse, and "F" for forward
5. The flow of air may be regulated by adjusting flow valve at the
base of the handle.
6. Ensure the air supply is clean and does not exceed 90 PSI while
operating the wrench.
Too high an air pressure and unclean air
will shorten the ratchet's life due to excessive wear, and may be
dangerous -causing damage or personal injury.
7. Keep children away from tools and workplaces when using tools.
5
For any technical questions, please call 1-800-665-8685
Fig. 1
