VS65 SERIES MV SOFT STARTER
POWER ELECTRONICS
16
TECHNICAL CHARACTERISTICS
GENERAL
FEATURES
Colour (Metal Parts)
RAL 7032
Corrosion Protection
C4 in accordance with ISO 12944-2
Painting duration
H in accordance with ISO 12944-1
Input and output holes for cabling
Yes, access from above
COMMUNICATION
Standard Hardware
RS232 / RS485
Optional Hardware
Ethernet
Standard Protocol
Modbus-RTU
Optional Protocol
Profibus DP, Devicenet, Ethernet, N2 Metasys
Control modes
Local: from keyboard
Remote: from the digital and analogic inputs
PLC: start / stop
MOTOR
PROTECTIONS
Input phases sequence
High Voltage
Input Low Voltage
Start current limit
Rotor locked
Motor overload (thermal model)
Under load
Unbalanced phases
Shearpin current
Maximum number of starts/hour
SOFT STARTER
PROTECTIONS
SCR overheat
Excessive start time (max 120s)
Input phase loss
SOFT STARTER
SETTINGS
Torque pulse
Initial torque
Initial torque time
Acceleration time
Current limit: 1to 5·In
Overload: 0.8 to 1.2·In, Overload curve: 0 to 10
Deceleration time / Freewheel stop
Slow Speed(1/7 fundamental frequency)
Dual setting
Number of Starts/hour allowed
Torque control
Water hammer control stop
REGULATIONS
Certification
CE
Designed as
EMC Directive (2004/108/CE)
EN61000-6-2, -4
Design and construction
EN62271-1,-200
EN60071-1,-2