Power Electronics SD 300 Series, Getting Started Manual

Page: 9 / 354

POWER ELECTRONICS SD300
SAFETY SYMBOLS
7
SAFETY SYMBOLS
Always follow safety instructions to prevent accidents and potential hazards
from occurring.
In this manual, safety messages are classified as follows:
WARNING
Identifies potentially hazardous situations where
dangerous voltage may be present, which if not avoided,
could result in minor personal injury, serious injury or
death
Be extremely careful and follow the instructions to avoid
the risk of electrical shocks.
CAUTION
Identifies potentially hazardous situations, which if not
avoided, could result in product damage, or minor or
moderate personal injury.
Read the message and follow the instructions carefully.
NOTICE
Identifies important measures to take in order to prevent
damage equipment and warranty lost, as well as
encouraging good use and environmental practices
Other symbols used in this manual for CAUTION messages are the following:
Hot surface. Be careful and follow the instructions to avoid burns and
personal injuries.
Risk of fire. Be careful and follow the instructions to prevent causing
an unintentional fire.
Caution risk of electric shock. Timed discharge of stored energy. Wait
for the indicated time to prevent electrical hazards.
Caution, risk of hearing damage. Wear hearing protection .