Power Dynamics 178.226, Instruction Manual

Page: 7 / 16

7 - 16
PRODUCT FEATURES
General
•
Integrated high power amplifier
•
Music playback via Bluetooth
•
MP3 Player
•
High efficient low-mid woofer
•
Line and mic input with Bass and Treble
Controls
•
Line output allows daisy chaining of additional
speakers
•
High power dynamic horn driver
•
Wide dispersion directivity horn
•
Stand mounting with 35mm pole socket
•
ABS scratch-resistant housing
•
Compact speaker system for easy transport
Recommended for
•
Bars
•
Restaurants
•
Small theatre
•
Karaoke
•
Fitness
•
Conference rooms
•
Small halls
•
Stage monitoring
INPUT PANEL
1. Balanced input connector MIC (PDA-8A:
6.3mm Jack or PDA-10A XLR-6.3mm Jack)
2. Volume control for MIC
3. Line input for audio input source e.g. mixer,
CD player, etc
4. Balanced XLR line input
5. Volume control for Line Input
6. Tone control Bass and Treble
7. Output connector (line out). For connection to
a second active speaker box.
8. Clip indication. These LED will light up when
amplifier are on max power. It can occur that
these LED will lit up now and then, this is not
a problem. But if it lights up continually you
need to adjust the volume down, otherwise
permanent damage to equipment might occur
9. Power Indication. This clear green indicator
will light when the amplifier is turned on.
10. On/Off Switch: For switching the speaker on
and off. Always adjust the volume down to its
minimum before switching this speaker on.
11. Mains Power Connector / Fuse. This main
fuse secures the speaker against defects.
Replace this only with a fuse of same type
and value.
12. MP3 Player
13. Volume control MP3 player
14. Output for external passive speaker. NOTE:
Minimum impedance is 8 Ohm!
MP3 PLAYER :
A. DISPLAY: Shows MP3 information
B. USB/SD/Bluetooth SWITCH: Use switch for
playing from USB stick,SD card, Bluetooth
C. PLAY/PAUSE: Track play or pause mode
D. STOP: Track stop playing
E. REPEAT: Select All, Folder, One or Random
F. PREV: Play previous track
G. NEXT: Play next track
H. USB CONNECTION
For connection of a USB stick with MP3 files
I. SD CARD CONNECTION
For connection of a SD CARD with MP3 files
HOW TO CONNECT WITH YOUR BLUETOOTH DEVICE:
First turn on speaker, then press on “MODE” (F) till you see “AUX”. Then use your mobile or computer to search a
Bluetooth device. When you find the “POWER DYNAMICS PLAYER” then connect. The password is: 0000
EXTERNAL SPEAKER
These speakerseries come with a 4-p speaker connector (14) for connection to an extra passive speaker. For optimized
performances we recommend you to use only the PDA passive speakers, which are especially designed for these
series. Minimum impedance is 8 Ohms.