ELECTRIC SOLDERING SET
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
When unpacking, you will find the following parts in the
plastic packaging:
1
Soldering gun with tip
1
Roll of solder
1
Soldering grease
1
Spare tip
1
Cutting tip
1
Operating instructions
Check all parts for shipping damage. Should you detect
any damage, or should any parts be missing, please notify
the dealer from whom the machine was bought.
PRODUCT INFORMATION
1. Tip
2. Fixing screw
3. Status light
4. Switch
5. Handle
6. Power supply lead.
OPERATIVE RANGE
This appliance is designed for domestic use. This
soldering gun is suitable for soldering on printed circuit
boards, soldering of plastic and for burning work on
wood and leather. All other applications are specifically
excluded.
EXPLANATION OF SYMBOLS
In accordance with essential applicable safety
standards of European directives.
Class II machine – Double insulation – You don’t
need any earthed plug.
Risk of material damage and/or physical injury.
Risk of an electric shock.
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
Always check that the power supply corresponds to the
voltage on the rating plate. Also check that your mains
voltage corresponds to the input voltage of the battery charger.
The battery charger is double insulated in accordance
with EN 60335; therefore no earth wire is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm
2
. When using a cable reel always unwind
the reel completely.
GENERAL SAFETY INSTRUCTIONS
Warning! When using electric tools, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury,
including the following. Read all these instructions
before attempting to operate this product.
Retain for future refence.
Voltage
| 230 V~
Frequency
| 50 Hz
Power consumption
| 150 W
Specified operation cycle
| 12 s on / 48 s off
Type of protection
| II
Weight
| approx. 1.08 kg
2
Powercraft
Powercraft
7
