UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
Model Number: PROS-450
12
Assembly
Replacing worn sanding paper (ø125mm)
Fig. 3
Before assembly sanding paper always remove the plug from the
mains.
The sandpaper (5) is fixed by Velcro fastener to facilitate the replacement.
• Simply pull off the sanding paper
• Press the new one in the centre of the sanding sole (6)
Coarse sand-paper (grain 50) removes in general the bigger part of the
material and fine sand-paper (grain 120) is used for the finishing.
Replacing the sanding sole
The sole has to be replaced when the Velcro
®
has been worn out.
6
5
