Helpline No. UK / Northern Ireland 0151 649 1500 Rep. Ireland 189 094 6244
Model Number: PMS 210/1
14
The reprinting or reproduction by any other means, in whole or in part,
of documentation and papers accompanying products is permitted only
with the express consent of ISC GmbH.
For EU countries only
Never place any electric tools in your household refuse.
To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and its
implementation in national laws, old electric tools have to be separated from other waste and disposed of
in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the demand to return electrical devices
:
As an alternative to returning the electrical device, the owner is obliged to cooperate in ensuring that the
device is properly recycled if ownership is relinquished. This can also be done by handing over the used
device to a returns center, which will dispose of it in accordance with national commercial and industrial
waste management legislation. This does not apply to the accessories and auxiliary equipment without
any electrical components which are included with the used device.
The product meets the requirements of EN 61000-3-11 and is subject to special connection conditions.
The product does not meet the requirements of EN 61000-3-3, meaning that use of the product at any freely selectable connection point is not
allowed.
The product is exclusively intended for use at connection points which
a) do not exceed a maximum permissible supply impedance Z, or
b) which have a continuous current-carrying capacity of the mains of at least 100 A per phase.
As the user, you are required to ensure, in consultation with your electric power company if necessary, that the connection point at which you
wish to operate the product meets one of the two requirements, a) or b), named above.
The electric power company may impose restrictions for the connection of the product.
Anleitung_PMS_210-1_SPK7:_ 11.06.2007 14:45 Uhr Seite 14