6
Clean the blade bed before inserting the blade.
Insert the blade by proceeding in the reverse order.
Make sure the planing blade is flush with both ends
of the blade block. Always replace both blades at the
same time to ensure even planing.
Important: Before using your electric hand-held
planer for the first time, make sure the blades are
installed correctly and are firmly in place.
Replacing the drive belt
Loosen the screw and take off the belt guard.
Remove the worn drive belt and clean both belt
discs.
Place the new drive belt on the small belt disc and,
while turning the blade block, pull the belt over the
large belt disc too.
Make sure the longitudinal grooves on the drive belt
are inside the guide grooves of the drive wheels.
Remount the belt guard and screw it firmly in place.
ORDERING REPLACEMENT PARTS
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
TECHNICAL DATA
Power supply
230 V - 50 Hz
Rating
600 W
Idling speed ntr
16,000 rpm
Planing depth
0-2 mm
Planing width
82 mm
Noise pressure level LPA
89 dB (A)
Noise power level LWA
102 dB (A)
Vibrations äw
<2.5 m/s
2
Weight
2.7 kg
Earthing
1
AnleitungEP 600 GB 24.10.2001 11:41 Uhr Seite 6
