![background image](http://html.mh-extra.com/html/power-craft/78702/78702_instruction-manual_1586264017.webp)
17
ENGLISH
INSTRUCTION MANUAL
Connect cutter to mains electricity.
Switch on at on/off button (11), allow blade to
achieve max. speed.
Push tile towards blade. Use feed-in guide (4) if
required. Do not push tile too hard. Allow blade
to work through tile.
Switch machine off. Remove tile scraps when blade
has come to a complete stop.
Mitre cut (45°) for tiles.
Fit mitre-cutting board (5) on cover plate.
Place tile on mitre-cutting board face down and
push towards blade.
Blade replacement
Switch machine off, disconnect from mains.
Lift cover plate.
Empty water holder.
Slacken lock nut on motor shaft and screw off
with spanner. Remove washer.
Remove old blade, replace with new.
Replace washer.
Fit and tighten lock nut using spanner.
Start the cutter and let it run freely for a few
seconds to check blade is correctly fitted.
Replace cover.
Cleaning and maintenance
Switch machine off, disconnect from mains.
Wipe with a well-wrung cloth after use, and always
keep the surface and ventilation holes free of dirt.
Empty and clean water holder after use.
Environmental information
You can help protect the environment!
Follow local environmental regulations:
Dispose of unwanted electrical
equipment at an approved refuse
disposal centre.
Summary of Contents for 78702
Page 21: ...21 ILLUSTRATION ...
Page 22: ...22 PART LIST ...