26
IMPORTANT! The mower is supplied with no
motor oil or petrol. Remember to fill up with oil
and petrol before starting the motor!
Use
Filling petrol:
Remove the filler cap (7) from the fuel tank and
fill up with petrol. Screw the filler cap on again
and check that it will not work loose during use.
Check for fuel leaks.
Filling oil:
Remove the oil filler cap (8). Check oil level using
the dipstick on the underside of the filler cap. Top
up if necessary. Replace filler cap.
Starting the motor:
Check that the clutch handle is not activated
before starting the motor.
Set the throttle (13) to START (furthest forward).
Hold the cut-out handle in and pull the starter
handle (6).
Allow the motor to warm up for a few minutes
before use.
If you release the cut-out handle, the motor will
stop immediately.
Use
Hold the cut-out handle in and adjust the motor
to the required speed using the throttle lever.
Adjust cutting height by pulling the height
adjustment handle (11) out and putting it in the
required position. Push it in towards the motor
(e) to increase cutting height and away from the
motor (f) to reduce. Release the handle.
Fit the grass bag by lifting the flap (g) on the rear
of the mower and fit the bag on the adapter (h).
Check the bag is secure before starting the mower.
The grass bag can be secured to the handlebar.
Instead of the grass box, a direct exhaust chute
can be fitted using six nuts and bolts (i).
ENGLISH
INSTRUCTION MANUAL
Summary of Contents for 78503
