![background image](http://html.mh-extra.com/html/power-craft/54479/54479_instruction-manual_1586253012.webp)
12
ENGLISH
INSTRUCTION MANUAL
Never allow stone to be in contact with item to be
worked - or other objects - when starting grinder.
Do not touch metal filings until they have cooled.
Do not leave machine before grinding stone has
come to a complete standstill.
Do not spill water on motor compartment when
filling water holder.
Before first use
Fit rubber feet under machine.
Grinding
Fill water holder (5), until water level is approx.
10 mm up grinding stone (3). Remember to top
up during use.
Switch on using on/off button (2) and allow
machine to reach full speed before beginning to
work.
Present item to stone slowly, increasing pressure
gently and gradually. Never present item abruptly
to stone as this can cause item to kick back or
damage grinding stone.
Switch off after use.
Always empty water holder after use. Avoid water
running into motor compartment!
Replacing grinding stones
Empty water holder.
Slacken nut (4) using an Allen key. Remove old
stone, clean axle and fit new stone.
Start machine and let it run freely for a few seconds
to check stone is correctly fitted.
Cleaning and maintenance
Clean by wiping exterior parts with a damp cloth.
Grinding dust and filings can be removed using a
brush or compressed air.
Do not use corrosive or abrasive cleaning agents.
Environmental information
You can help protect the environment!
Follow local environmental regulations:
Dispose of unwanted electrical
equipment at an approved refuse
disposal centre.