![background image](http://html.mh-extra.com/html/power-craft/43736/43736_user-manual-and-warranty_1586356011.webp)
Helpline No. UK/Northern Ireland 0151 6491500 Rep. Ireland 1890 946244
Web Support www.einhell-uk.co.uk
Model Number: 43736
11
Instructions
Operation
The equipment consists of an assembly with a pump, which is
encased in a shock absorbing housing. The equipment comes with
a lance and a non-slip gun (for an optimal working position), whose shape and
configuration comply with the applicable regulations.
Using for the first time
Once you have completely assembled the high-pressure cleaner
and connected all connections, proceed as follows:
Turn on the water inlet supply. Press safety pin “a” (Fig. 2) on the
spray gun and pull back trigger lever “b” (Fig. 2) in order to bleed
the trapped air out of the device.
Turn on the device by switching the ON/OFF switch (Fig. 1/12) to “I”.
To temporarily turn off, release the trigger lever (b), at which point
the device goes to standby. As soon as you press the trigger lever
again (b), the high-pressure cleaner restarts.
To completely turn off the high-pressure cleaner, switch the ON/OFF
switch (Fig. 1/12) to “0”.
Using cleaning agent (Fig. 2;7)
Unscrew and remove the foam nozzle (7) from the cleaning agent
tank (15) (Fig. 7). Fill a suitable cleaning agent into the cleaning
agent tank (15) and replace the foam nozzle (7). Fit the foam nozzle
(7) to the pistol (14) as shown in Fig. 2. The cleaning agent will be
added automatically.
Holder for the gun/accessories (Fig. 1;8)
The gun and accessories can be kept in the provided holder
(10) (Fig. 8) in order to save space when not in use.
4