12
Charging
Charge the battery fully before using the machine for the
first time.
Connect charger (6) to the screwdriver’s charger socket (3).
Plug charger into mains electricity socket. Allow to charge
for 5-7 hours.
Allow the screwdriver to cool after use before recharging.
Checking battery
You can check battery strength by switching the screwdriver
on, press button (4) and check diodes.
Red/amber/green alight: Battery fully charged
Red/amber only:
Battery half charged
Red only:
Battery nearly flat
Use
Insert the desired bit direct into the screwdriver chuck, or
use the magnetic holder as an extension.
Press the upper part of the on/off switch (2) for clockwise
rotation.
Press the lower part of the on/off switch (2) for anticlockwise
rotation.
Switch off by releasing the on/off button.
The chuck will be locked when the screwdriver is not acti-
vated. In this mode you can use it to manually drive screws
in or out, even if the battery is flat.
Cleaning and maintenance
Wipe the rechargeable screwdriver using a well-wrung cloth
after use, and always keep the surface and ventilation holes
free of dirt.
Never use corrosive or abrasive detergents, as they may
affect the plastic parts on the rechargeable screwdriver.
Environmental information
You can help protect the environment! Follow local
environmental regulations: Dispose of unwanted
electrical equipment at an approved refuse dis-
posal centre.
Take out the batteries before scrapping the product.
ENGLISH
