UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PKB-1050/2
9
Safety instructions
Electrical safety
Always check that the voltage on the machine corresponds to the
voltage on the rating plate. Also check that your mains voltage
corresponds to the input voltage of the battery charger.
The machine is double insulated; therefore no earth wire is
required.
• Do not use the machine if the mains cable or the mains plug is damaged.
• Only use extension cables that are suitable for the power rating of the
machine with a minimum thickness of 1.5 mm
2
. If you use an extension
cable reel, always fully unroll the cable.
Mains plug replacement
If the moulded 3-pin plug attached to the unit is damaged and needs
replacing, it is important that it is correctly removed and replaced by an
approved BS 1363/13A fused plug and that the following wiring instructions
are followed.
The wires in the mains cable are coloured in accordance with the following
code:
blue
neutral
brown
live
As the colours of the wires in the mains cable of the unit may not
correspond to the coloured markings identifying the terminals in the plug,
proceed as follows:
- The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
- The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
