CONFIDENTIAL
6
Removing the Chassis Cover
1. Shut down the computer and turn off all external devices. If you do not have a grounding strap, leave
the computer plugged into the wall socket. Leaving the computer plugged in ensures a positive
ground. Disconnect everything but the power cord.
2. Locate and remove the three screws on the back of the computer that affix the case to the back of the
machine.
Figure 1: Removing the chassis cover
3. Slide the cover towards the back of the machine and lift off.
Installing the Chassis Cover
1. Standing at the front of the machine, place the front edge of the cover under the front bezel with the
back edge tilted toward you.
2. Place the back end of the cover down and slide the cover forward.
3. Screw the thumb screws into the appropriate holes in the rear of the machine and reconnect the
cables to the back of the machine.
Chassis Cover Removal/Installation
Chassis Cover Removal/Installation
Figure 1: Removing the chassis cover
thumb screws
Chassis Cover
