14
P
ower AirFryer Pro Elite™ | Model: TXG-DT10L
Using the Digital Control Panel
1. Power/Start–Stop Button:
Once the Unit
is plugged in, the Power Button will light up.
Selecting the Power Button once will cause
the full panel to be illuminated. Selecting
the Power Button a second time will activate
the cooking process at the default temperature
of 370° F (190
° C
) and time of 15 mins.
Selecting the Power Button at any time during
the cooking process will shut down the Unit,
causing the display to go dark immediately
the running light to go dark within 20 secs.
The fan will continue running for 20 secs.
to cool down the Unit.
2. Internal Light:
Selecting this button will
help you check cooking progress while the
Unit is in operation.
NOTE:
Opening the door
during the cooking process will pause the
Unit. The internal light will illuminate if the
doors open.
3. Rotation Button:
Select this button when
cooking anything using the Rotisserie Mode.
This function can be used with any preset.
The icon will blink while in use.
4. Temperature Control Buttons:
These buttons enable you to raise or lower
the cooking temperature by 5° F (2.7
° C
)
increments ranging from 150° F (65
° C
)
to 400° F (200
° C
). Dehydration ranges
from 90° F (30
° C
) to 170° F (75
° C
).
5. Time Control Buttons
: These buttons
enable you to select exact cooking time
to the minute, from 1 min. to 90 mins. in all
modes except dehydration, which uses
30-min. intervals and an operating time
of 2–24 hrs.
6. LED Digital Display:
The Digital Numeric
Display will switch between Temperature and
Time Remaining during the cooking process.
7–16. Cooking Presets:
Selecting any Preset
Button sets the Time and Temperature to the
Preset's default value. The cooking process
starts automatically five secs. after the Preset
has been selected, or the Power Button can
be pressed after the Preset Button to start
the Unit immediately. You may override these
presets using the Time and Temperature
Buttons.
17. Fan Icon:
This icon will blink in sequence
while cooking is in progress and continue
blinking up to 20 secs. once you shut the Unit
down.
5
2
13
8
15
10 16
12
7
11
3
17
1 9
6
4
14
FIG. T
