degree of protec
ti
on against an electric shock.
Your Drill has the following Func
ti
ons:
The opera
tin
g switch (3) is used for all work carried out with the drill machine
The machine can be set to con
tinu
ous opera
ti
on with the locking bu
tt
on (4)
The direc
ti
on switch (2) controls the direc
ti
on of mo
ti
on when the machine is used as a
screwdriver or if you would like to remove a drilling bit that has become jammed.
Preparing the Drilling Machine
Warning! When performing the following work. Always ensure that the machine is not connected
to the mains power supply.
Inserting the Drill
For key chuck
First remove the mains supply from the socket. Turn the ring of the drill chuck (1) un
ti
l the
clamping jaws are open wide enough. Insert the drill into the clamping jaws of the drill chuck (1).
Insert the end of the drill chuck key into one of the three holes on the body of the drill chuck (1)
and let the head of the key lock into place in the ring of the drill chuck (1). In order to
ti
ghten
the clamping jaws and
fi
x the drill in place, turn the drill chuck key in a clockwise direc
ti
on.
Important: Then remove the key from the chuck (1)!
Working with the Drilling Machine
Ensure that the mains power supply voltage is the same as the opera
tin
g voltage of your machine.
For details, please see the type plate.
Insert the correct drill for the type of job to be performed. If necessary, adjust the bit stop. Adjust
the speed of the machine using the regula
tin
g wheel on the opera
tin
g switch (4). The more the
opera
tin
g switch (4) is pressed in. the faster the drill rotates. Set the direc
ti
on switch (2) to the
desired direc
ti
on of mo
ti
on. Never alter the posi
ti
on of the direc
ti
on switch (2) when the
machine is switched on by pressing the opera
tin
g switch (4). When opera
tin
g switch (4) is
released, the machine stops. If you would like to use con
tinu
ous opera
ti
on press the locking
bu
tt
on (3) while the opera
tin
g switch (4) is press. In order to switch o
ff
the machine during
con
tinu
ous opera
ti
on, press the opera
tin
g switch (4) again and then let it go. Do not touch the
drill chuck (1) while the machine is switched on.
Drilling Tips
Always insert the correct size and type of drill or screwdriver.