3. Press the or button on the front panel or on the remote control to adjust the hour.
4. Press the
button and the minutes will flash.
5. Press the or button on the front panel or on the remote control to adjust the minute.
6. Note: During Bluetooth mode, the clock can not be adjusted.
Press the
button to switch between RADIO, BT(Bluetooth), USB(with USB device
inserted), CARD(with SD card inserted) and AUX-IN(auxiliary input) modes.
The muted state
will be also released when the volume knob is used.
Press the
button on the remote control to turn on the loudness to reinforce the output
of bass frequencies, press again to turn it off.
Press the
button on the front panel or on the remote control to toggle between EQ OFF,
FLAT, POP, ROCK, CLASS.
To receive your voice when you calling by using this bluetooth handsfree system.
The 3.5mm auxiliary input stereo connection is designed for deiveces with 3.5mm line-out or
headphone output.
The RESET button is used to reset all parameters to factory default settings.
This function may be used when the LCD does not display normally or sound is distorted, or
when any of the controls are disabled. Press the button to release the front panel and
remove it, then use a thin object with a pointed end to depress the
button.
CLK
Change the Source (MODE)
MODE
Loudness on/off
LOUD
Preset Equalizer (EQ)
EQ
Release the detachable front panel
Built-in Microphone
Aux input connector
Reset System (RESET)
RESET
Mute on/off
MUTE
In power on mode, briefly press the
button to toggle mute on or off.
Press the (Release) button to detach the detachable front panel, then the front panel can
be removed from the chassis.
The USB port of this car radio is designed for media playback from flash memory devices.
Note: This USB port is not designed to charge high-power devices.
USB port
GENERAL OPERATION (CONT.)
6
