Page -20
TV OPERATIONS
(TV function is for PADVD-220T only)
Connect TV antenna as it is shown on electrical connection diagram.
Switch to TV mode
Press MODE button repeatedly to select the TV mode, and press BAND select TV system: PAL DK
→
PAL I
→
PAL BG
→
PAL M
→
PAL N
→
SCEAM DK
→
SCEAM BG
→
NTSC M
Auto tuning
1. Press
/
cursor buttons on RC or
︱
/
buttons on panel or touchable
screen to start auto search of available TV station in backward/forward direction. When the first
available station is found searching will be stopped and the station found will be played. Press
these buttons again to continue searching.
Manual tuning
Press and hold for 2 seconds
/
cursor buttons on RC or
︱
/
︱
buttons
on panel or touchable screen repeatedly to search the TV stations step by step.
Auto preset memory
1. Press RPT/P.SCAN button on the RC or Press AS/PS button on panel to start auto tuning; the
search range is the current TV frequency range. The stations found will be stored into the memory
automatically.
2. Press this button again to stop auto searching.
Select the TV station
1. Press number buttons on the RC 0-9 to recall the desired TV station.
2.Press number button on front panel 1-6 to recall the desired TV station.
Other functions
Subwoofer
Connect the subwoofer to the unit using sub output (see electrical diagram). Press SEL button,
choose expert and set subwoofer ON to enable subwoofer.
Anti-theft system
Remove the panel
1. Press the PWR button to turn the power off.
2. Press OPEN button to detach the panel.
3. Pull the panel out.
4. Place the panel into the case and take it with you when you leave the car.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole on the front of the set until they lock.
3. Pull out the unit.
