Power Acoustik PACD-875, Instruction Manual

Page: 4 / 12

3
5. TRACK UP/DOWN BUTTONS
During CD mode, press button allow you to track forwards. Hold the button
allow you to skip forwards.
During AUDIO mode, press and hold or for more than 2 seconds you can auto
search channel. Then press or , you can have manual search channel.
6. EJECT BUTTON
Press it to eject the CD DISC.
7. CLOCK ADJUSTMENT BUTTON
During frequency display, press it to change into clock display function. Press the
button for more than 2 seconds, until time flashes, and you can adjust time now.
To adjust hour:
with time be flashed on display, push the tune button to adjust hour, when
adjustment is completed, release the button.
To adjust minute:
with time be flashed on display, push the tune button to adjust minute. When
adjustment is completed, release the button.
9. BAND BUTTON
Press it to select your desired radio band and the band which is selected will be
displayed on LCD.
10. EQ BUTTON
Press it to switch between 4 preset equalizer curves: FLAT, POP, CLAS, ROCK. The
sound quality will be changed.
11. LOUD BUTTON
When reduce the volume to half level, press it to enhance the bass effect.
12-13-14-15. 16-17. PRESET MEMORY BUTTONS
A. 18To memorize the current frequency, press any one of the six preset Buttons hold
for more than 2 seconds.
B. To recall the preset memory, press one of the preset buttons [1-6].
C. In CDP mode, press 1 TOP button to play first track.
D. In CDP mode, press 2 RPT button to continuously repeat same track. Press again
to stop repeating.
E. In CDP mode, press 3 INT button to play first ten seconds part of each track on disc.
Press again to stop scan and listen to track.
F. In CDP mode, press 4 ROM button to play all tracks on disc in random order. Press
again to stop random play.
18. AS/PS BUTTON
In radio mode:
When short pressing, the radio searches for each preset station. When the field
strength level is more than the threshold level of Stop level, the radio is holding at
that preset number for few secretary with releasing mute, and then searches again.
In FM band, FM 1, FM 2 and FM 3 is checked one at a time.
When long pressing (more than 1 second), the radio searches from the current
frequency and checks the signal strength level until 1 cycle search is finished. And
then 6 strongest stations are preset to the corresponding preset number. The AS
operation is implemented in the each band of selected band. When the AS
operation is finished, the radio executes the preset scan.
BASIC OPERATION