Powered by Safety
®
2
General Information
01.4IB.51051C
PowlVac
®
Remote Racking Device Assembly
for PowlVac® CDR 5kV & 15kV Circuit Breakers
A. S
cope
The information in this instruction bulletin
describes the following PowlVac
®
Remote
Racking Device and components for use
with PowlVac CDR 5kV & 15kV vacuum circuit
breakers:
• 51897G11 - Remote Racking Device and
Motor Control Box (complete assembly)
• 51899G10 - Remote Racking Device
• 51895G01 - Motor Control Box
B. p
urpoSe
The information in this instruction bulletin is
intended to provide information required to
properly operate and maintain the
PowlVac Remote Racking Device and
components
described in
This instruction bulletin provides:
1. Safety guidelines
2. General descriptions of the operation
and maintenance of the PowlVac Remote
Racking Device and components
3. Instructions for installation
4. Illustrations, photographs, and description
of the equipment described in
Ch 1 General Information, A. Scope
The illustrations and photos in this document
are provided as general information to aid in
showing component locations only.
All illustrations and photos are shown using
deenergized equipment.
Follow the appropriate safety precautions
while handling any of the equipment. Failure
to do so may result in death or serious injury.
!
WARNING
To the extent required, the products described
herein meet the applicable ANSI, IEEE, and
NEMA Standards; however, no such assurance
is given with respect to local codes and
ordinances which may vary greatly.
c. I
nStructIon
B
ulletInS
A
vAIlABle
e
lectronIcAlly
Changes to the instruction bulletin may be
implemented at any time and without notice.
Go to
to ensure use of the current
instruction bulletin for Powell equipment.
NOTICE
To contact the Powell Service Division call
1.800.480.7273 or 713.944.6900, or email
For specific questions or comments pertaining
to this instruction bulletin email
with the Instruction
Bulletin number in the subject line.
