Powered by Safety
®
41
Maintenance
01.4IB.65131
Table B Lubrication
Location
Reference
Figure
Lubricant
Method
Electrical Parts
Primary Disconnecting Device
Figure 13, a
B - Grease Wipe clean. Apply lubricant only to actual contact surface.
Ground Connection
Figure 14, t
B - Grease Wipe clean. Apply lubricant only to actual contact surface.
Secondary Disconnect Receptacle
Figure 13, d
B - Grease Wipe clean. Apply lubricant only to actual contact surface.
Mechanical Parts
Spring Yoke Pin
Figure 13, c
C - Oil
Trip Shaft Bearing
Figure 13, e
C - Oil
Jackshaft Support
Figure 13, g
C - Oil
Pawl Support Arm
Figure 13, h
C - Oil
Crank Pin
Figure 13, i
C - Oil
Motor Drive Shaft Roller Needle
Bearings
Figure 13, n
C - Oil
Pawls
Figure 13, m
C - Oil
Close Latch Shaft Face
Figure 13, l
A - Grease Apply a light coating of grease and remove all excess.
Ratchet Wheel
Figure 13, j
A - Grease
Jackshaft Lever Pins passing through
Operating Pushrods
Figure 13, k
C - Oil
Avoid lubricating on operating pushrods.
Fundamental Linkage Pin
Figure 13, f
C - Oil
Apply to penetrate where pin passes through end link.
Main Closing Spring Guide Rod
Figure 13, b
C - Oil
Racking Mechanism
Figure 14, o
C - Oil
Apply C - Oil to the crank arm rollers and racking crank
arms.
Primary Trip Prop
Figure 14, q
C - Oil
Open-Close Flag Drive Lever Pin at
Jackshaft
Figure 14, s
C - Oil
Flag Support Pin
Figure 14, r
C - Oil
Jackshaft Outer Bearing Support
Figure 14, v
C - Oil
Motor Drive Shaft Coupling
Figure 14, z
C - Oil
Wheel
Figure 14, aa
C - Oil
Motor Drive Shaft Support Bearings
Figure 14, y
C - Oil
Camshaft Needle Bearings
Figure 14, x
C - Oil
Close Shaft Support Bearing
Figure 14, w
C - Oil
Motor Cutoff Cam
Figure 14, u
A - Grease Apply to peripheral surface only.
Fundamental Linkage
Figure 14, p
C - Oil
Apply to penetrate where pins pass through lines.
Note:
For all previous lubrication requirements Powlube-104 A-Grease replaces Anderol 757 and
Rheolube 368A, B-Grease replaces Mobilgrease 28 and C-Oil replaces Mobil 1 and Anderol 456.
See
Ch 5 Maintenance, B. Mechanism Area, 2) Lubrication
for more details.
