5
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
1. Unfolding the Handle
Procedure
1. Loosen the two handle knobs and pull out the two
handle bolts until you can move the handle freely and
rotate the handle to the operating position (Figure 2).
2. Tighten the handle knobs until they are snug (Figure 3).
Figure 3
1. Handle knobs 2. Handle bolt
Figure 2
2
1
Procedure Description
Qty.
Use
1.
No parts required
–
Unfold the handle.
2.
Carriage bolts
Shoulder Bolt
Flange nuts
Washer
Knob
Cap Plunger
Chute
Deflector
4
1
4
1
1
1
1
1
Install the discharge chute.
Install the discharge chute.
Install the discharge chute.
Install the discharge chute.
Install the discharge chute.
Install the discharge chute.
2. Installing the Discharge
Chute
Procedure
1. Install the chute deflector to the discharge chute using
bolts and, washer, nut, deflector knob and cap plunger
(Figure 4).
2. Install the discharge chute to the chute base using
three screws and nuts (Figure 4).
IMPORTANT:
Do not overtighten the flange nuts;
otherwise you may damage the discharge chute.
Figure 4
1. Deflector
2. Carriage bolts
3. Flange nuts 5/16-18
4. Washer
5. Knob
2
2
7
6
3
3
8
4
9
5
10
1
6. Discharge chute
7. Carriage Bolt
8. Shoulder Bolt
9. Flange nuts 1/4-20
10. Cap Plunger
Summary of Contents for PR621ES
Page 19: ...19 SERVICE NOTES...
