background image

7

OPERATION

KNOW YOUR SNOW THROWER

READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER.  Compare 

the illustrations with your snow thrower to familiarize yourself with the location of various controls and adjustments.  Save 

this manual for future reference.

These symbols may appear on your snow thrower or in literature supplied with the product.  Learn and understand 

their meaning.

READ AND FOLLOW ALL SAFETY INFORMATION

AND INSTRUCTIONS BEFORE USE OF THIS PRODUCT.

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

EAR PROTECTION

RECOMMENDED

DANGER

OR WARNING

SNOW

DISCHARGE

TRACTION

DRIVE CONTROL

DISENGAGED

ENGAGED

ROTATE LEFT

ROTATE RIGHT

CHUTE 

ROTATION

IGNITION KEY. INSERT 

TO START AND RUN

CHOKE CLOSED 

(START)

RECOIL START

CHOKE OPEN 

(RUN)

PRIMER

IGNITION KEY.  PULL 

OUT TO  STOP

UP

CHUTE
DEFLECTOR

DOWN

FORWARD

REVERSE

DANGER, KEEP FEET AWAY

DANGER, KEEP HANDS AWAY

READ OPERATORS MANUAL

DANGER

DO NOT OPERATE ON STEEP SLOPES

WATCH FOR THROWN OBJECTS

OPERATE AT A SAFE DISTANCE FOR OTHER PEOPLE

DO NOT PLACE HANDS 
NEAR BLADES

DANGER

REMOVE SPARK 
PLUG WIRE BEFORE 
PERFORMING 
MAINTENANCE

READ OPERATORS MANUAL

DANGER

WATCH FOR THROWN OBJECTS

OPERATE AT A SAFE DISTANCE FROM OTHER PEOPLE

STEER LEFT

STEER RIGHT

TRACTION

DRIVE CONTROL

SNOW
DISCHARGE

Summary of Contents for PR 271













































Reviews: