11
KEY PART
NO. NO.
DESCRIPTION
1 532 17 05-51 Control Th/ch Flag
2
817 72 04-08 Screw Hex Thd Cut 1/4-20 x 1/2
3
– – – – – – Engine, B&S 219807-1515-G5
(438747) (Order parts from engine
manufacturer)
4
532 17 97-58 Muffler Exhaust B&S
13
532 16 52-91 Gasket Eng 1 313 Id Tin Plated
23
532 16 98-37 Shield BRN/DBR Guard
29
532 13 71-80 Kit Spark Arrestor (Flat Scrn)
31
532 40 75-45 Tank Fuel Front
32
532 43 02-20 Cap Asm Fuel
33
532 12 34-87 Clamp Hose
37
532 40 11-37 Line Fuel
40
532 12 40-28 Bushing Snap Nyl Blk Fuel Line
44
817 67 04-12 Screw Thdrol 1/4-20 x 3/4
45
817 00 06-12 Screw Hex Wsh Thdrol 3/8-16
46
819 09 14-16 Washer 9/32 x 7/8 x 16 Ga.
72
532 19 23-34 Screw Socket Head 5/16-18 x 3/4
78
817 06 06-20 Screw 3/8-16 x 1-1/4
81
873 51 04-00 Nut Keps Hex 1/4-20 unc
122 532 42 19-22 Extension Drain Oil
NOTE:
All component dimensions given in U.S. inches
1 inch = 25.4 mm
For engine service and replacement parts, call the toll free
number for your engine manufacturer listed below:
Briggs & Stratton
1-800-233-3723
REPAIR PARTS
TRACTOR - MODEL NUMBER PO12538LT (96018000600), PRODUCT NO. 960 18 00-06
ENGINE
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained
and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambi-
ent operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are
placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop
the rated gross power when used in a given piece of power equipment (actual “on-site” or net power). This difference is
due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-
engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher
rated power for this Series engine.
