Poulan Pro PK23H48YT Operator'S Manual Download Page 32

     This product has been expertly en gi neered and carefully manu fac tured to rigid quality stan dards.  As with all 
mechanical products, some adjustments or part replacement may be necessary during the life of your unit.

For Parts and service, contact our authorized distributor: call 1-800-849-1297

•      For replacement parts, have available the following information:

a.    Model Number/Manufacturer's I.D. Number

b.    Description of part.

For Techical Assistance: call 1-800-829-5886

For a Parts Manual, go to our website: www.poulan-pro.com/support.asp

NOTE:

    

Electrolux Home Products  provides parts and service through its au thor ized dis tribu tors and 
dealers; there fore, all requests for parts and service should be directed to your local dealer(s).  
The phi loso phy of Electrolux Home Products is to con tinu ally improve all of its prod ucts.  If 
the operating characteristics or the appearance of your product differs from those described 
in this Manual, please contact your local dealer for updated in for ma tion and as sis tance. 

PARTS AND SERVICE

Summary of Contents for PK23H48YT

































Reviews: