background image

2

IDENTIFICATION OF SAFETY SYMBOLS

WARNING:

This unit can be dangerous! Careless or improper

use can cause serious injury.

Read the operator’s manual before use. Failure to follow instructions could

result in serious injury. Save operator’s manual.

Blade can throw objects violently. You

can be blinded or injured. Always wear

hearing protection and safety glasses

marked Z87. Always wear head protec-

tion, heavy, long pants, long sleeves,

boots and gloves.

Hazard zone for thrown objects.

S

Blade can throw objects violently.

S

You and others can be blinded/injured.

S

Keep children, bystanders, and animals

50 feet (15 meters) away.

DANGER:

Blade moves momentarily after the trigger switch is

released.

S

The blade can seriously cut your or others.

S

Allow blade to stop before removing it from

the cut.

S

Do not overreach.

SAFETY RULES

WARNING:

When using gardening

appliances, basic safety precautions must al-

ways be followed to reduce the risk of fire and

serious injury. Read and follow all instructions.

This power unit can be dangerous!

Operator

is responsible for following instructions and

warnings on unit and in manual. Read entire

instruction manual before using unit! Be thor-

oughly familiar with the controls and the prop-

er use of the unit. Restrict the use of this unit

to persons who have read, understand and

will follow the instructions and warnings on

the unit and in the manual. Never allow chil-

dren to operate this unit.

SAFETY INFORMATION

ON THE UNIT

OPERATOR SAFETY

DANGER:

RISK OF CUT. KEEP

HANDS AND FEET AWAY FROM BLADE

AND CUTTING AREA. Do not attempt to

clear away cut material or hold material to be

cut when the blade is in motion. Make sure

powerhead is stopped and spark plug wire is

disconnected (or powerhead is disconnected

from power source) when removing jammed

material from the cutting blade. Do not grab or

hold attachment by the cutting blade.

S

Dress properly. Always wear safety glasses

or similar eye protection when operating, or

performing maintenance on your unit (safety

glasses are available). Eye protection should

be marked Z87.

S

Always wear face or dust mask if operation is

dusty.

Summary of Contents for 545167665









Reviews: