background image

7

These symbols may appear on your tractor or in literature supplied with the product.  Learn and understand their meaning.

DANGER, KEEP HANDS

AND FEET AWAY

 

FREE WHEEL

(Automatic Models only)

OVER TEMP

LIGHT

KEEP AREA CLEAR 

SLOPE HAZARDS

15 

15 

(SEE SAFETY RULES SECTION)

BATTERY

REVERSE

FORWARD

FAST

SLOW

ENGINE ON

ENGINE OFF

OIL PRESSURE

FUEL

CHOKE

MOWER HEIGHT

PARKING BRAKE

LOCKED

PARKING BRAKE

UNLOCKED

REVERSE

NEUTRAL

HIGH

LOW

ATTACHMENT

CLUTCH ENGAGED

PARKING BRAKE

IGNITION SWITCH

ATTACHMENT

CLUTCH DISENGAGED

P

ENGINE START

MOWER LIFT

Failure to follow instructions
could result in serious injury or
death. The safety alert symbol
is used to identify safety inform-
ation about hazards which can
result in death, serious injury
and/or property damage.

DANGER 

indicates a hazard which, if not avoided,

will result in death or serious injury.

WARNING 

indicates a hazard which, if not avoided,

could result in death or serious injury.

CAUTION 

indicates a hazard which, if not avoided,

might result in minor or moderate injury.

CAUTION 

when used 

without 

the alert symbol,

indicates a situation that 

could result in damage

to the tractor and/or engine.

FIRE 

indicates a hazard which, if not avoided,

could result in death, serious injury and/or
property damage.

HOT SURFACES 

indicates a hazard which,

if not avoided, 

could result in death, serious injury

and/or property damage.

REVERSE

OPERATION

SYSTEM (ROS)

LIGHTS ON

OPERATION

Summary of Contents for 532 43 88-78





























Reviews: