manualshive.com logo in svg

Poulan Pro 460ZX, Operator'S Manual

Share
Download
Poulan Pro 460ZX Operator'S Manual Download Page 53

SERVICE JOURNAL

53

Action

Date, mtr reading, 

stamp, sign

Delivery Service

1.

Charge the battery.

2.

Adjust the tire pressure of all wheels to 15 PSI (1 bar).

3.

Mount the steering controls in the normal position.

4.

Connect the contact box to the cable for the seat’s safety switch.

5.

Check that the right amount of oil is in the engine.

6.

Adjust the position of the steering controls.

7.

Fill with fuel and open the fuel shut off valve.

8.

Start the engine.

9.

Check that there is drive to both wheels.

10. 

Check the mower deck adjustment.

11. 

Check:
Safety switch for the parking brake.
Safety switch for the mower deck.
Safety switch in the seat.
Safety switch in the steering controls.
Parking brake functionality.
Driving forward.
Driving backward.
Engaging the blades.

12.

Check engine high idle speed

13.

Inform the customer about:

Need and advantages of following the service schedule.
Need and advantages of leaving the machine for service.
Effects of service and maintaining a service journal on the machine’s 
resale value.
Application areas for mulching.

14.

Fill in the sales papers, etc.

Delivery service has 
been carried out.
No remaining notes.
Certified:

Summary of Contents for 460ZX





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands