11
KEY PART
NO. NO.
DESCRIPTION
NOTE:
All component dimensions given in U.S. inches
1 inch = 25.4 mm
1
- - - - - -
Engine B&S Model No. 445877-0760-E1
2 149723
Muffler
9
194320
Keeper Belt Engine
11 179335
Clutch
Electric
12 194343
Pulley
Engine
15
193499
Tank Fuel 4.0
18 195951
Cap
Asm
20 175437X421 Control
Throttle
21
416358
Screw #10 x 0.750 BOS Thread
22 187767X428 Control
Choke
28 401135
Fuel
Line
29
137180
Spark Arrester Kit
31
145006
Clip Push-In Hinged
37 123487X Clamp
Hose
41
126197X
Washer 1-1/2 OD x 15/32 ID x .250
42
10040700
Washer Lock 7/16
45
73510400
Nut Keps Hex 1/4-20 unc
62
146629
Shield Heat Muffler
69 165391
Gasket
70
159955
Tube Exhaust LH
71
160589
Tube Exhaust RH
79
183906
Screw Socket Head
81
148456
Tube Drain Oil Easy
82
181654
Plug Drain Oil
84
17060620
Screw 3/8-16 x 1-1/4
85
179953
Bolt Hex 7/16-20 x 3.75 Gr. 5
87
198239
Bolt 5/16-18 unc x 1 w/Sems
90
17000616
Screw 3/8-16 x 1
91
187495
Bushing 1.375 OD
TRACTOR - - MODEL NUMBER PBGT26H54X (96042007100), PRODUCT NO. 960 42 00-71
ENGINE
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engi-
neers) code J11940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and
corrected in accordance with SAE J1995 (Revision 2002-5). Actual gross engine power will be lower and is affected by,
among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of prod-
ucts on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas
engine will not develop the rated gross power when used in a given piece of power equipment (actual “on-site” or net
horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humid-
ity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may sub-
stitute an engine of higher rated power for this Series engine.