background image

8

OPERATION

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments.  
Save this manual for future reference.

Our tractors conform to the applicable safety standards of the American National Standards Institute. 

FIG. 3

(A) ATTACHMENT LIFT LEVER

 – Used to raise and lower 

the mower or other attachments mounted to your trac tor.

(B) BRAKE PEDAL

 – Used for brak ing the tractor and 

start ing the engine.

(C) PARKING BRAKE

 – Locks clutch/brake pedal into the 

brake position.

(D) THROTTLE/CHOKE  CONTROL

 - Used for starting and 

controlling engine speed.  

(E) ATTACHMENT CLUTCH LEVER

 – Used to engage 

the mow er blades, or other at tach ments mounted to your 
tractor.

(F) IGNITION SWITCH

 – Used for starting and stopping 

the engine.

(G) REVERSE OPERATION SYSTEM (ROS) "ON" PO-
SITION

 – Allows operation of mower or other powered 

attachment while in reverse.

(H) LIGHT SWITCH

 – Turns the headlights on and off.

(J) CRUISE CONTROL LEVER

 - Used to set forward 

move ment of tractor at desired speed without holding the 
forward drive pedal.

(K) FORWARD DRIVE PEDAL

 - Used for forward move-

ment of tractor.

(L) REVERSE DRIVE PEDAL

- Used for reverse move-

ment of tractor.

(M) FREEWHEEL CONTROL

 - Disengages transmission for 

pushing or slowly  tow ing the trac tor with the engine off.

(P) SERVICE REMINDER / HOUR METER

 – Indicates when 

service is required for the engine and mower.

E

A

B

F

C

H

G

D

K

J

L

M

P

Summary of Contents for 403808































Reviews: