Poulan Pro 190785 Owner'S Manual Download Page 23

Page: 23 / 44

TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 25)

•      Raise hood.
•      Unsnap headlight wire connector.
•         Stand in front of tractor. Grasp hood at sides, tilt toward

engine and lift off of tractor.

• To replace, reverse above procedure.

02778

FIG. 25

HEADLIGHT
WIRE
CONNECTOR

HOOD

SERVICE AND ADJUSTMENTS

ENGINE

TO AD JUST THROTTLE CON TROL CABLE

The throttle control has been preset at the factory and
ad just ment should not be necessary. If adjustment is nec-
es sary, see engine manual.

TO AD JUST CHOKE CON TROL

The choke control has been preset at the factory and ad-
just ment should not be necessary. If adjustment is neces-
sary, see engne manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not
operate properly due to suspected carburetor problems,
take your tractor to an authorized service center for repair
and/or adjustment.

Summary of Contents for 190785













































Search results

Summary of Contents for 190785

Reviews:

Related manuals for 190785

Brands by name

Popular brands

Poulan Pro 190785, Owner'S Manual

Search results

Summary of Contents for 190785

Reviews:

Related manuals for 190785

Brands by name

Popular brands