Poulan Pro 177110 Owner'S Manual Download Page 15

15

MOWING TIPS

• Tire chains cannot be used when the

mower housing is attached to tractor.

• Mower should be properly leveled for

best mowing performance.  See “TO
LEVEL MOWER HOUSING” in the
Service and Adjustments section of
this manual.

• The left hand side of mower should be

used for trimming.

• Drive so that clippings are discharged

onto the area that has been cut.  Have
the cut area to the right of the tractor.
This will result in a more even distribu-
tion of clippings and more uniform
cutting.

• When mowing large areas, start by

turning to the right so that clippings will
discharge away from shrubs, fences,
driveways, etc.  After one or two
rounds, mow in the opposite direction
making left hand turns until finished.

• If grass is extremely tall, it should be

mowed twice to reduce load and
possible fire hazard from dried
clippings.  Make first cut relatively
high; the second to the desired height.

• Do not mow grass when it is wet.  Wet

grass will plug mower and leave
undesirable clumps.  Allow grass to
dry before mowing.

• Always operate engine at full throttle

when mowing to assure better mowing
performance and proper discharge of
material.  Regulate ground speed by
selecting a low enough gear to give
the mower cutting performance as well
as the quality of cut desired.

• When operating attachments, select a

ground speed that will suit the terrain
and give best performance of the
attachment being used.

34

TRACTOR -- MODEL NUMBER 271470

GROUND DRIVE

56

42

29

28

112

14

42

40

38

42

39

57

51

51

74

75

78

76

77

1

25

19

24

2

53

35

34

37

36

35

62

36

64

65

59

212

55

63

116

70

77

61

22

27

119

51

5

18

6

52

30

32

32

30

52

11

21

4

3

13

10

8

12

12

7

61

61

15

52

41

66

27

51

150

48

151

202

49

47

50

120

6

18

113

6

170

79

Summary of Contents for 177110

























Reviews: