background image

3

IDENTIFICATION OF SAFETY SYMBOLS

When servicing unit, use only identical replacement

parts.

Never allow children to operate this unit.

Store unit indoors in a high, dry place out of the reach of

children.

Always stop unit and disconnect spark plug before clean-

ing or servicing.

WARNING:

Fire hazard. Never mix, pour, or store gasoline or

use the unit near a flame or sparks (including smoking, open flames, or

work that can cause sparks).

Use unleaded gasoline and two--stroke oil mixed at a ratio of

40:1 (2.5%).

OPTIONAL ATTACHMENTS

These attachments used in combination with the specified powerhead have been evaluated to

ANSI B175.3--2003, “Grass Trimmers and Brushcutters -- Safety Requirements”.
Powerhead including trimmer attachment

SM705

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Brushcutter attachment

PP4000C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

These attachments used in combination with the specified powerhead have been evaluated to appli-

cable ISO and EN safety requirement standards by the Swedish Machinery Testing Institute:
Edger attachment

PP1000E

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cultivator attachment

PP2000T

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Blower attachment

PP3000B

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pruner attachment

PP5000P

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of Contents for 115270526



















Reviews: