342 / ANKUPPELN / 9700-GB
- 5 -
GB
Connecting unit to tractor
TD28/91/8
Connecting to tractor
(8a - 8e
Before connecting or
disconnecting
- bring both swath discs to the most
outward position (A).
- Connect mower
unit.
- Secure locking
clamp (V) with cot-
ter pin.
Adjusting
(8i
the MULTITAST-
System L
- The telescopic upper link enables the mowing
drums to adapt to uneven ground that runs
diagonally to the direction of drive.
- The area of swing (L) can be adjusted by
turning the spindle.
Shorten upper link (see Supple-
ment D)
(8a - 8e, 8i see Supplement A1
Spring tensioning
The force applied on the ground by the mowing
drums is controlled by spring tension.
1. Lift unit hydraulically.
2. Hook up main spring.
3. Lower unit to the ground.
CAT 310
front
: The
adjusting measurement
should be 425 mm.
4. The optimum angle of "20
°
- 22
°
"
should be maintained as well. This
can be checked by using the
measurement "150 mm".
• Various attachments for the different tractor types are shown on the following
pages. These atachments are manufactured for relatively simple self-
assembly.
5. Slip the hose clamp (20) onto the tension spring.
Doing this means that
spring tension does not
have to be checked
every time unit is
attached to tractor.
The set measurement
of " 425 mm" need only
be checked and, if
necessary, adjusted
when tractors are
changed.
TD38/94/5
20 - 22°
150 mm
425 mm
TD29/93/2
20
425
mm
TD38/94/2b
20 - 22°
A
0 mm
90°
Adjusting the upper link
1. Lower unit to the ground.
2. Vertically allign attachment frame (90
°
).
3. Adjust distance (A = 0 mm).
The mower unit must not tip forward during operation.
495.672
A
A