Page
3
of
3
1. Carefully lay the Table Top (A) upside down on a flat scratch-free or carpeted surface. Attach the Legs (B) to the
Table Top (A), by inserting dowels on the legs into the holes on the bottom of the Table Top (A) as shown in
fig. 1
,
illustrations. 1
.
Illustration.1
Fig.1
2. Attach Stretcher (C) to the Legs (B) by inserting tenon on the Stretcher (C) into the holes on the Legs (B). Place
Spring Washers (F), Halfmoon Washers (H) onto the Allen Bolts (D) into the holes on the cutout of the Stretcher
(C) into the inserts on the Legs (B), tighten with the Allen Key (I) as shown in
fig. 2
,
illustration. 2
.
3. Place Spring Washers (F), Flat Washers (G) onto the Allen Bolts (E) into the holes on the top frame of the Legs
(B) into the inserts on the bottom of the Table Top (A), tighten with the Allen Key (I) as shown in
fig. 2
,
illustration. 3.
Illustration. 2 Illustration. 3
Fig. 2
4. If the floor is uneven, adjust the recessed levelers found on the bottom of the furniture as shown in
illustration.
4
.
•
Carefully grasp one side of the furniture and elevate it slightly to provide access to levelers.
•
Turn the leveler until adequate contact will be made with the floor.
•
Carefully set the furniture down.
Illustration. 4
•
Repeat until the furniture sits level and stable.
Care Instructions:
•
Dust often using a clean, soft, dry and lint-free cloth.
•
Blot spills immediately and wipe with a clean, damp, cloth.
•
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
Thank you for your purchase
Stores | catalog | www.potterybarn.com
B
A
C
B
B
