P: 2 / 2
3) Once both screws are secured in place, raise the mirror against the wall and align the two keyholes over the screw
heads and then slide the mirror down until the keyholes are engaged with the screws. The mirror now should be fully
supported by the screws.
4) Hand the
mirror’s loop up and mark location of mounting knob (D). Refer to step#2 for installing the other anchor.
Once installed, position the mounting knob over the anchor and secure using screw (B), tighten firmly. (Fig.1)
5) Attach the metal loop onto mounting knob (Fig.2) and fasten the end cap (E). (Fig3)
Fig.1 Fig.2 Fig.3
CARE INSTRUCTIONS:
Wipe with a soft, dry cloth. To protect the finish, do not use house cleaners or abrasives.
A household glass cleaner may be used for the mirror surface
– spray the cleaner on a clean cloth first and then
use the cloth to clean the mirror.
Thank you for your purchase.
Stores | Catalog | w ww .potterybarn.com
