Page
2
of
5
Benchwright Double Sink Console
Assembly Instructions
Please read all instructions before beginning assembly.
For your safety and convenience, assembly by two people is recommended.
Use the parts and hardware lists to identify and separate each of the components included.
Save all packing materials until assembly is complete to avoid the accidental discarding of smaller parts or hardware.
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as this will
avoid damaging parts during assembly. The shipping box provides an ideal work surface.
Keep instructions for future used.
TOOLS:
(1) Allen Key Phillips screwdriver (not included)
PARTS:
(2) Basin - A (1) Marble top -B (1) Back splash – C (1) Console base - D
HARDWARE:
(8) Bolt-E (8) Spring washer-F (8) Flat washer - G (8) L shape bracket - H
Assembly Instructions:
1.
Carefully turn the marble countertop (B) up on a carpet or scratch-free surface. Position the basin (A) over the marble top
cut-out. Make sure the basin is centered to the marble top cut-out. Attach basin to marble top by placing L shape brackets (H)
and insert bolts (E) with spring washers (F) and flat washers (G). Tighten by Allen key provided. But DO NOT over tighten.
Repeat for the other basin. Fig. 1
Note: position the basin (A) squarely under the cut-out before fixing L shape brackets, do not tighten the brackets at this stage
Apply a continuous bead of high quality silicone or acrylic based bath sealant to the basin rim where it will contact the
countertop
DO NOT USE PLUMBERS PUTTY OR ANY OIL BASED SEALANT AS THIS WILL STAIN THE MARBLE.
Note: Do not use adhesives or adhesive sealants.
Draw the basin rim up to the countertop until it is snug
CAUTION: TO AVOID BREAKAGE, DO NOT OVER-TIGHTEN WITH ALLEN KEY.
Immediately wipe away any excessive sealant.
Fig. 1
