Date: 21-October-2011 Page 4/7
Rev:
3. Roll out the slat roll (8) onto the support rail on the inner side of side rail (3). Secure each slat by long screw (G) at two
ends using a Phillips head screwdriver (Not Included). Repeat step 2 to attach the side rail (3) to the upper end panel (2).
(G) (B)
(32x) (8x)
4. Attach the metal bracket (D) onto the vertical rails of long and short guard rail (4&5). Secure by short Allen bolts (E) using
Allen key (C). Attach the guard rail (4&5) onto the side rail (3) of upper bed by slotting the metal bracket (D) onto the inner
side of side rail (3). Secure each metal bracket (D) to the side rail with medium screw (F) using a Phillips head screwdriver
and insert the short Allen Bolts (E) through the holes on the metal plate (D), tighten with the Allen Key.
Note:
One end of the short guard rail (5) should be next to the post of end panels so there is enough space for the ladder
at other end.
(D) (E) (F)
(5x) (10x) (10x)
32x
4x
5x
