pottery barn kids FARMHOUSE KITCHEN OVEN Manual Download Page 13

 

Date: 8‐Aug‐13 

 

 

 

 

 

 

          www. potterybarnkids.com 

 

   

                                     

Page 13 of 13

 

Rev:   

 

Adjusting the levelers

Due to an uneven floor, the furniture may not sit level due causing it to wobble. If the furniture wobbles, determine 

which corner does not touch the ground correctly. With two people follow these steps: 

1. Carefully elevate the item slightly to provide access to the levelers attached to the bottom. 

2. Turn the levelers until adequate contact will be made with the floor. Gently set down the piece and check 

stability. 

3. Repeat steps until furniture sits firmly on the ground.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Care Instructions: 

 

Dust often using a clean, soft, dry and lint-free cloth. 

 

Blot spills immediately and wipe with a clean, damp, cloth. 

 

We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish. 

 

Hardware may loosen over time. Periodically check to make sure all connections are tight. 

Re-tighten if necessary. 

 

Thank you for your purchase 

Stores  |  catalog

 

Summary of Contents for FARMHOUSE KITCHEN OVEN














Reviews: