Date: 2014-October-24
Rev:
Page 6/7
7.
Attach the Conversion Kit to the Crib Ends by aligning pre-drilled holes with wooden dowels as shown in the
illustration below.
*Note: Do not fully tighten bolts (B&C) at this point.
8.
Attach the mattress base back in place by Inserting the 2 Bolts (D) as shown in the illustration below.
(A)
(D)
B
2
x
2x
C
2
x
1x
F
4
2x
(C)
(B)
(F)