10
Front
Rear
Positive / Negative wire pad
+
-
Camera board socket
Pre-Flight Checklist
1. Ensure that the drone battery and controller batteries are fully charged.
2. Ensure that the left stick of the controller is in the middle position.
3. Strictly follow the instructions in sequence for turning on and turning off the
controller and drone. Turn on the controller power first and then turn on the
drone power before flying; Turn off the drone power first and then turn off the
controller power when fishing flying. Improper on/off sequence may cause the
drone to fly out of control and could threaten your safety or the safety of
others.
Please cultivate a correct habit of tturning on and turning off.
4. Ensure the connection between the battery and motor is solid. Vibration during
use may cause a bad connection and the drone could become difficult to
control.
5. Improper operation may cause the drone to crash, which may cause motor
defects affecting flying ability. If this occurs, go to the local distributor to buy
new replacement parts,so that the drone will be resorted to it's optimum status.
Receiver board wire diagram
Summary of Contents for U47
Page 1: ...Operation Guide U47 ...