POSX xi3000 User Manual Download Page 8

 

9

 

EAN8 (with or without Add-on) 

 

EAN13 (with or without Add-on) 

 

Code 93 

 

Code 128 

 

EAN 128 

 

MSI 

 

Telepen 

 

Plessey 

3.9

 

Negative Barcodes 

 

The scanner can be configured to read negative barcodes. Normally, barcodes are 
printed with the color of the bars darker than that of the spaces. But for negative 
barcodes, they are printed in the opposite sense just like negative films. The spaces 
of the negative barcodes are printed with a color darker than that of the bars. 

 

10

4.

 

Output Interface (Xi3000-BTSTAND) 

 

The Xi3000-BT is a multi-interface scanner. It can be used as a keyboard wedge 
scanner, an RS-232 scanner, or a USB scanner. The output interface can be 
programmed using the setup barcodes in this manual. 

Please ensure that you have an RF connection between the scanner and the base 
prior to selecting the interface type. 

4.1

 

Keyboard Wedge Interface 

4.1.1

 

Keyboard Type

 

The keyboard wedge interface is enabled by configuring/selecting keyboard type. 
The supported keyboard types are listed below. 

 

PCAT - US, French German, Italian, Swedish, Norwegian, UK, Belgium, 
Spanish, and Portuguese KBD 

 

PS2-30 

 

IBM 3477 TYPE (Japanese KBD) 

 

IBM 34XX, 319X & Memorex Telex (122Keys) 

4.1.2

 

Keyboard Style - Alphabets 

Keyboard layout style can be selected. There are three options to this setting: 
default layout (US or English style), AZERTY layout, and QWERTZ layout. This 
setting only works when the keyboard type selected is for US keyboard. The 
scanner will make necessary adjustment when sending the ‘A’, ‘Q’, ‘W’, ‘Z’, ‘Y’, 
and ‘M’ character according to this setting. 

4.1.3

 

Keyboard Style – Digits 

There are two digit layout styles as shown on the following figures. One has digit 
on top (upper row) of a key and another has digits on bottom (lower row) of a key. 

The digit layout style can be changed by the following configuration settings. 
There are three options: 

Default

Lower Row

, and 

Upper Row

. The scanner will 

make necessary adjustment when sending digits according to the setting value of 
this parameter. This setting is used with the above setting (Keyboard Style – 
Alphabets) and perhaps Character Substitution setting, when support to languages 
not available on the scanner is needed. 

 

        

 !           @            #           $  

         

1            2            3           4  

Digits on Lower Row 

Deleted: 

 

Summary of Contents for xi3000


























Reviews: